Trimmer Econoliser for IBEX or Quantum (sold by Purchase order)

SKU: 9711782

$8,550.00

Features:
• A 95% reduction in the water used is normal when compared to
constant flow immersion sterilisers.
• At least a 95% reduction in the cost of heating the water.
• Virtually no steam produced which reduces the risk of airborne
nasties being picked up by the steam and condensing on surfaces
above, with drips contaminating the carcasses.
• Activated by insertion of the tool into the unit. Safe and easy for
operators.
• Fully automatic operation gives consistent results with any operator.
• New easy access design allows for ease of servicing, minimising
down time
• Comes standard with water level sensing, which purges any air that
gets into the tank automatically, preventing the heater element
overheating and the thermal overload tripping.
• All the Econoliser models work with any temp. of water. Supplying
the Econoliser with cold water and letting the built-in water heater
heat the water is the most efficient and least expensive way of
heating the water.
• The built-in water heater ensures the water temperature is always
above 82°C/180°F, no matter what temperature the water supply is
(setpoint is 90°/194°F)
• Because the Econolisers use so little water and therefore very little
electrical energy to heat them, energy from a renewable source can
be used, thereby reducing your carbon footprint.

SOLD BY PURCHASE ORDER ONLY

currently not available

Description

Designed to replace the traditional constant flow or water bath type steriliser with the
emphasis on using as little water as is needed and yet still deliver better results when it
comes to sterilizing the tool.

Optional Extras
External Temperature display which shows the temperature of
the water leaving the nozzles
Specification
• Voltage ……………………………………………..240VAC 50/60Hz
• Max Load Current……………………………………………….….11A
• Dynamic Water Pressure min…………………………3Bar/45psi
• Sterilisation Min Water Flow Rate….…..4.2L/min or 1 Gal/min
• Sterilisation Cycle Time Factory Set………………………4.5secs
• Sterilisation Water used per Cycle………0.140Ltrs or 4.75Fl oz
• Temperature Setpoint……………………………………90°/194°F

You may also like…